How do you unlock a padlock with a magnet?

Place the magnet in the center of the back of the lock with the magnetic side touching the back of the lock. Pull up the top of the lock as far as it will go. Line the arrow so that the line on the turning wheel is aligned with the zero. Pull the top of the lock again as far as you can.

How do you force a padlock to unlock?

The simplest way to do this is to insert two fingers into the shackle loop and use them to force the shackle away from the top of the lock. This will put the locking pins inside the lock into the right position for a quick crack-job. Make sure you’ve eliminated all excess slack from the shackle.

How do you open a padlock without destroying it?

Take a pair of bolt cutters and place them around the lock’s loop. Then, apply firm pressure until the loop breaks. If you don’t have bolt cutters, try using a shim or a screwdriver. Use either to pry off the numerical dial, and slip the tool beneath it.

How do you open a magnetic lock without the key?

If the door has a knob or handle, push IN on the door firmly, then use the magnet to unlock the door. If the lock is in contact with the strike, it will not unlock with the magnet. The strike should be adjusted to allow the lock to swing freely. If the door has no handle, make one using tape.

THIS IS INTERESTING:  What do you mean by magnetic flux?

How does a magnetic padlock work?

Magnetic locks use electromagnetism to control the entire locking mechanism. When the magnet is energized, it bonds to the armature and locks the door. To allow access or egress, a switch must be provided to de-energize the magnet. As the electric power activates the magnet, the bolt locks the door.

How strong are magnetic door locks?

Strength. The average magnetic lock can withstand up to 1200 pounds of force. Ease of installation. Maglocks are relatively easy to install.

How do I turn off magnetic lock?

Removing A Magnetic Door Lock

  1. Unplug The Unit From The Power Source. First and foremost, you have to remove the power source of your electromagnetic lock. …
  2. Remove The Screws That Connect The Armature To The Door. …
  3. Unscrew The Magnet From The Door Jamb. …
  4. Uninstall Any Accessories.