How does an electromagnetic door lock work?

Magnetic locks use electromagnetism to control the entire locking mechanism. When the magnet is energized, it bonds to the armature and locks the door. To allow access or egress, a switch must be provided to de-energize the magnet. As the electric power activates the magnet, the bolt locks the door.

How are electromechanical locks powered?

The two components are in contact when the door is closed. When the electromagnet is energized, a current passing through the electromagnet creates a magnetic flux that causes the armature plate to attract to the electromagnet, creating a locking action.

How do you unlock a magnetic lock?

There are four main ways to open a magnetic lock:

  1. Press the button on the exit switch.
  2. Enter a code into a numeric key panel.
  3. Hold an authorized HID keycard next to the keypad sensor.
  4. Cut power to the lock. (Note: This only works for fail safe magnetic locks. Fail secure locks will not open when power is cut.)

Are magnetic door locks secure?

Maglocks are fail-safe, while electric strikes are generally fail-secure. In other words: Magnetic locks require power to lock the door, whereas electric locks require power to unlock the door.

What is an electrified lock?

Electrified Cylinder Locks are simple knob sets (no mortise lock) that have a small solenoid inside to control the lock function. They are also available in fail-safe and fail-secure versions. Electrified Cylinder Locks are among the least secure locks available.

THIS IS INTERESTING:  What are electromagnetic waves caused by?

How do you open a magnetic door lock without a key?

How to Unlock Magnetic Door Lock without a Key

  1. Smoothly press the handle or button until the device is open.
  2. Find a thin ruler, plastic card, knife, knitting needle, or nail file, and pull the tab.

How do you force a magnetic door to open?

The way to do this is relatively straightforward. You’ll have to connect the power, at which point you actually test the lock’s unlocking capabilities with whatever access system you have at hand. When the lock is powered, it should hold the door closed tightly, and when the power is cut, the lock should open.

What happens to electric locks when the power goes out?

Smart locks are battery powered, so the locking mechanism can keep working even when the rest of your home loses power. However, any remote capabilities that rely on the internet or a connected hub will not work.

How much power do magnetic locks use?

Up 1200 pounds of holding power • Only 3 watt power consumption • Vandal and weather resistant • Stainless steel • Low Maintenance – no moving parts • Good choice in a cold climate, always warm when powered and locked • Easier installation, no mortising or door modification for most installations when using maglocks • …